R&D, design, production and quality control consolidated with many years of outstanding experience. You can find our products everywhere heat treatment takes place.
For the production of fine casting moulds Linn High Therm quotes dewaxing furnaces. In the model series KK-DH dewaxing and firing of the moulds can be carried out in one working step. The furnaces with useful chamber 80, 170 and 1000 liters are equipped with rotary plates on several floors. Due to smaller doors for removal of the moulds you can work continuously and energy-saving. The molten wax is drained through the rotary plate axis and collected in a insertion in the lower housing part.
Also furnaces of the model series KK 50 – 2000 liters useful chamber can be used for dewaxing and subsequent firing.
For dewaxing also furnaces of the model series KK-U up to 950 °C with a useful chamber volume of 40 – 350 liter and drying units of the model series LHT up to 300 °C with useful chamber volume 14 – 750 liter are used.
Rotary hearth furnace, brick and ASW insulation, Tmax 1100 °C, 55 – 2000 l
Air circulation chamber furnace, brick and ASW insulation, Tmax 850 °C, 44 - 350 l
Chamber furnace, brick and ASW insulation, gas tight muffle, Tmax 1200 °C, 69 - 462 l
Chamber furnace, brick and PCW insulation, vacuum tight muffle, Tmax 1200 °C, 61 - 436 l
Microwave belt drier, 2,4 GHz, Tmax 230 °C
Laboratory chamber furnace, ASW insulation, gas tight muffle, 2.6 - 15 l, Tmax 1050 °C
Tube furnace, ASW insulation, gas tight, Ø 134 mm, heated length 2000 mm, Tmax 1300 °C, 38 kW
Rotary hearth furnace, 2 decks, Tmax 1100°C, brick insulation, 1 m³
Shuttle kiln, brick and ASW insulation, Tmax 1000 °C, 4300 l, 220 kW