R&D, design, production and quality control consolidated with many years of outstanding experience. You can find our products everywhere heat treatment takes place.
For shrink fitting resp. shrink wrapping, high and middle frequency generators or our models HTG resp. MFG are used. An important application area is shrink wrapping of stators in electronic motor housings.
Due to extremely high energy transfer, inductive heating also enables trouble-free disconnection of shrink fitting connections in case of repair or maintenance works.
Apart from that, resistance heated air circulation chambers of the model KK-U with standard sizes up to 350 l or customer specific special designs with useful chambers up to several m³ can be used. Highly dimensioned air circulation fans enable fast heating up and a homogeneous temperature distribution even in case of relatively low shrink fitting temperatures.
In special cases – in case of suitable geometry of the material – tube furnaces of the model FRH can be considered. They are used as pusher type furnaces.
Chamber furnace for hardening and annealing, brick and ASW insulation, Tmax 1200 °C, 40 - 600 l
Chamber furnace for annealing, brick and ASW insulation, Tmax 800 °C, 22 - 603 l
Tube furnace, high temperature, gas and/or vacuum tight, Ø 25 - 150 mm, heated length 150 - 1000 mm, Tmax 1800 °C
Chamber furnace for hardening, brick and ASW insulation, Tmax 1300 °C, 31 - 600 l
High frequency generator, 1,2 - 10 kW, 150 - 400 kHz
Shuttle kiln, brick and ASW insulation, Tmax 1340 °C, 1050 - 2750 l
Chamber kiln, brick and ASW insulation, Tmax 1340 °C, 55 - 2000 l
Air circulation chamber furnace, brick and ASW insulation, Tmax 850 °C, 44 - 350 l
Laboratory chamber furnace, ASW insulation, Tmax 1340°C, 1,5 - 18,4 l
Medium frequency generator, 10kW - 1MW, 5 - 100 kHz
Laboratory chamber furnace, ASW insulation, Tmax 1200 °C, 1 - 25 l
Chamber kiln, Tmax 1300 °C, 3,3 kW.