R&D, design, production and quality control consolidated with many years of outstanding experience. You can find our products everywhere heat treatment takes place.
Linn manufactures small and medium size graphitization furnaces of the model series GHV for the temperature range 2200 – 3000 °C with graphite or CFC heaters and graphite felt insulation. For the graphitization of carbon fiber you can also use graphite heated continuous furnaces from LHT.
As the lifetime of the graphite heater is very limited at a temperature of 2600 °C it is preferred to use an inductive heating of a graphite tube or a graphite crucible with middle frequency generators of the model series MFG 10 – 500 and a frequency of <8kHz for a higher temperature requirement. The advantage is, due to the simply geometry compared to the resistance heated graphite furnace, comparatively cheap prices for a spare heater.
Besides the classic graphitization the LHT units serve also for the production of carbon modifications.
Chamber furnace, bottom loader, PCW-insulation, high temperature, gastight, Tmax 2400 °C, 2-1000 l
Chamber furnace, high pressure, water cooled pressure vessel, PCW insulation, gas and vacuum tight, Tmax up to 2200°C, Pmax up to 200 bar
High frequency generator, 1,2 - 10 kW, 150 - 400 kHz
Chamber furnace, brick and PCW insulation, vacuum tight muffle, Tmax 1200 °C, 61 - 436 l
Medium frequency generator, 10kW - 1MW, 5 - 100 kHz
Rotary tube furnace, Al2O3-PCW/ASW insulation, gastight, tube inner dia. 300 mm, heated length 3000 mm, Tmax 1000 °C
Furnace line (pilot plant unit) for carbon fiber production, Tmax up to 1600 °C
Furnace line (laboratory unit) for Carbon fibre production, Tmax up to 1600 °C
Chamber furnace, high temperature, graphite felt insulation, gas and vacuum tight, Tmax 2600 °C, 6,2 l
Chamber furnace, high temperature, graphite felt insulation, gas and vacuum tight, Tmax 2500 °C, 0,2 l
Induction furnace, graphite felt insulation, gas and vacuumtight, Tmax. 3000 °C, 1.6 l, 20 kW